Our office and shop will be closed from 11-10-19 through 11-18-19
We Provide Boarding Solutions!
Call us NOW to solve your boarding problems.
813-645-6666
Others, just sell ramps.
Yacht Boarding Systems has just released a new product video. 10-11-2011
To see it click here
http://www.youtube.com/watch?v=dG8plkTM_8U
Miami Boat Show 2010 info segment video as seen on the Fox Sports Network "Pleasure Boating" program.
Watch this video NOW to see the Steadi-Plank™. click here
New Product
BLP-4
The BLP-4 is a 4 foot long boarding ramp designed to be used with a boat lift. The BLP-4 makes it easy to board and carrying items on and off the boat. This system is also great to use on a floating dock to go from the dock to the swim platform of the boat.
When not in use, it stores in a vertical position on the dock. You then push/lay it down to the boarding area of the boat to use it. ( The ramp will not go below the dock surface) When you are ready to lower the boat and or depart, you push/lift it back up to the vertical-store position. Gas Spring attached to the ramp and dock assist in the lift and hold it upright and restrain the ramp from being blown over by the wind. If the ramp will not be used for some time or a storm is coming, you can use its tie down to lock it in the vertical position or you can remove it from its dock mount. Handrails are avalible at an extra cost.
The BLP-4 has an MSRP of $1,375.00
Also avalible is the BLP-6, six foot version with an MSRP of $1,575.00
We may have several products that are left from our boat show exhibit booth that we are selling at a large discount.
Special Sale
Our PAS-BBR Flat Base Platform (ramp extra)-MSRP $2,898.00. The display unit on sale for $1,490.00 plus shipping.
Other display items may be avalible, please call.
813-645-6666
The
STEADI-PLANK Boat Boarding Ramp System©
Unlike the way most people use land based ramps, using a boat boarding ramp, boat gangway or gangplank on a vessel, the vessel is always moving up, down, forward, aft, and side to side as the tide, wind, and waves control it. Therefore, the ramp end that is on the dock is also moving. As the tide comes and goes, the vessel end of the ramp may be higher or lower than the dock and the underside of the ramp may be resting on the dock instead of the end with the standard rubber pad or wheels that most traditional ramps have. What we do is add UHMW skid pads to the under side of the ramp and at the bottom of the dock end of the ramp for it to slide on so not to damage the ramp or dock as the height difference of the vessel to the dock changes. Since the vessel is moving with respect to the dock, we have developed a mounting system to secure the ramp to the vessel. We use a flat non-skid for smother rolling of your “roll-on’s” on the ramp. We offer a removable, optional, full length handrail system. Our ramps are extendable with optional extra length sections to meet your changing needs.
We all
know that "One Size" does not fit all. The same
is true for portable boat boarding ramps, boat gangways, gangplanks, and passerelles. If you need a boarding ramp for your yacht, power boat, sailboat, motor boat, houseboat, deck boat, pontoon boat, or any other vessel,
one length of boarding ramp will not always work
for the many docking situations you will encounter. Also,
depending on the docking situation and changing tidal conditions,
you may need to mount the boat boarding ramp different ways
and from different locations on your "yacht".
The STEADI-PLANK
Boat Boarding Ramp System© will allow you the flexibility
to handle most all the dock and boat boarding situations that
you will encounter. The STEADI-PLANK Boat Boarding Ramp System© is made of marine grade aluminum, using the latest
state of the art "space age" honeycomb core construction
and bonding techniques. The STEADI-PLANK Boat Boarding
Ramp System© is very versatile and can be reconfigured
and added to as your needs change. Thus assuring that your
initial investment in The STEADI-PLANK Boat Boarding
Ramp System© is secure. The fact that you do not have
to discard what you have and start over when your boarding
system needs change, makes The STEADI-PLANK Boat Boarding
Ramp System© with, "Add-A-Feature" and
"Add-A-Length", stand out from the others
as a "best buy" value.
Start
with the basic 4', 6', 8' 10', or 12' STEADI-PLANK portable Boat
Boarding Ramp System© which includes two fixed Stainless
Steel STEADI-PLANK Cam Mounts, two Stainless Steel
Back Plates w/ Stainless Steel mounting bolts, washers, and
nuts, two STEADI-PLANK Mounting Forks w/ mounting
hardware, end Glide Plate, side Glide Pads, and two Stainless
Steel Eye Ring Nuts. Then, as your needs change, you can add
the "Add-A-Feature" options and "Add-A-Length"
STEADI-PLANK extensions as needed. The many economical
options will accommodate fixed side and transom mounts, swim
/ dive platform mounts, quick mount adapter, movable gunwale
/ transom mounts, vertical/horizontal rail mounts, and mounting
height /angle adjustments, as well as special custom mounts.
With the optional "Add-A-Length", STEADI-PLANK
extensions, you can configure the boarding ramps' span to
be 4', 6', 8', 10', 12' long or longer to accommodate different
docking situations. Ramps to allow for wheelchair and roll-on dock/equipment
carts are also available. Full-length safety handrails can also be added, if
desired.
We are
specialist in custom boarding ramps, boat gangways, wheelchair Accessible
boat ramps, and passerelles. We can build a size and design
to accommodate your specific needs. Just contact
us and let us help you acquire the STEADI-PLANK boarding
ramp that is right for you.
Join us on Facebook click here
Download
brochure: front page click
here, back page click here
Download price list click here
Need help
in determining what size ramp you need? click
here.
You don't have to make a leap of faith. For
the safety and convenience of you and your guests
you
should have The STEADI-PLANK Boat Boarding Ramp System.©
|